Ready houses

Specification



Basic specifications are outlined as follows:

Steel base floor external wall
Internal wall roof and ceiling internal doors
External door windows Electrical
Plumbing Air conditioning  

Steel base


-Welded base fame made of 140 mm U-Channel &I-beam, internally braced with 140mm-beam outer periphery welded all around as skirting.

-legs of 14 mm U-Channel is welded to frame at maximum 2.0m span. Legs height from ground level is approximately 50cms.

 

Floor

-Between U-channel and I-beam additional Hollow core steel section size 40*40mm, at 35cms space in between across the frame are placed to take up load and reduce deflection over 18mm thick plywood phenol coated.

-floor is covered with 4 mm PVC vinyl/rolls or carpet.

   

External wall

-The external wall consists of sandwich panel of size 122*244 cms having overall thickness 7.5 cms.


Internal wall
-Internal wall consists of sandwich panel 5 cm.thickness.
   
Roof and ceiling

-Sloped trusses are welded construction from angles size 40*40*4mm running across, and a top ,puylins of angle or hollow section run longitudinally.

-Trusses are also welded over peripheral angle holding top of external panels.

-G.I. corrugated or painted profiled sheet of 26 gauge are fixed with j- hocks 1/2''*31/2"on top of roof to cover the steel trusses.

-Ceiling is formed by fixing 4mm plain plywood of size 122*244 cms at bottom of steel truss-tees edges and peripheral angle.

-false ceiling 60*60cm gypsum board with fluorescent lamp 60*60cm.

Internal Door

-All doors hollow wooden, having red wood frames and flush door leaves consisting softwood cores faced with teack plywood glued and pressed.

 
External Door
-powdered aluminum profile of 18 cm.Thicknesswith clear or laminated 6mm. Glass.

Windows

-powdered anodized 1.8cm profile aluminum windows with clear 6mm thick glass sheet is provided in each room having opening size 100*100 cms. Fly screen is also provided with each window.

-Kitchen and bathroom windows are the same construction but with size opening 60*40 cms or 50*50cms.

 

Electrical

-All electrical wiring in 3-core is routed through PVC conduit, built in the wall panels and over the ceiling.

-Light switches and sockets of 13 and 15 lamps, one number each are provided in equal room.

-Electric distribution board with circuit breaker are installed with suitable capacity for 220.

-fluorescent light fitting and/or incandescent bulbs are provided as necessary.

-Exhaust fan is installed in bathroom and kitchen for ventilation.

Plumping

-PVC pipes and fitting are used for water supply line, with suitable values and chrome fixtures. Hot and cold water line are provided for washbasin and kitchen.

-bathrooms consist of one wash basin one western type

W.C. and a shower tray.

-Kitchen contains stainless steel sink mounted on wooden support.

-Electric water heater of appropriate capacity is also provided.

Air conditioning

-opening size 80*60 cms for a/c window unit are provided in each room.

-painted steel frame is provided for supporting a/c unit.

TOILET (FEMALE)

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-1toilet cubicle (5door, 5*2m)

-5 stools

-3wash basins

-3mirrors

-6 shower heads

-1 mop sink

-18changing room cabinets

-3 washing machines

-1 water heater

Including internal M&E works inside container

WASH ROOM /SHOWER 30 blds

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-9wash basins

-9mirrors

-12 shower heads

-4 washing machines

-16 changing room cabinets

-1 water heater Including internal M&E works inside container

TOILET (MALE) 2 BLDGS

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-1toilet cubicle (10door,10*2M)

-10 stools

-1 Urinal(Ditch type 6m long)

-4wash basins

-4mirrors

-1 mop sink

-1 water heater

Including internal M&E works inside container

OFFICE TYPE 3

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-1stools

Including internal M&E works inside container

OFFICE TYPE4

 

1AIR CONDITIONER /HEATER (24000 BTU)

Including internal M&E works inside container

**Hospitalization Room should refer to OFFICE Type 4 (excludes furniture, add 1 wash basin).

OFFICE Type 1

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-1wash basin

-1mirror

-1 stools

-1 shower head

-1 shower cubicle (1door, 2m)

-1 water heater

Including internal M&E works inside container

OFFICE Type 2

 

-1AIR CONDITIONER /HEATER (24000 BTU)

-1wash basin

-1mirror

-1 stool

-1 shower head

-1Bath

-1 water heater

Including internal M&E works inside container


Quality craftsmanship is standard at soufan homes We, at SOUFAN homes believe that you expect &deserve a well-built high quality home at an AFFORDABLE price.From the computer -generated floor plans and home designs, to the solid construction and beautiful, professionally designed interiors.SOUFAN builds each home for MAXIMUM CONVENIENCE AND MAXIMUM MAINTENANCEAnd all of this at an AFFORDABLE price within the budget of most people.SOUFAN home standard specification


Roof Design

 

A. Bituminous Fiber glass shingles

B. Felt paper.

C. Sandwich panel with OSB top Board

D. Metal Soffit.

E. Open steel Beam for vaulted ceiling providing layer interior volume

F. Metal Fascia

Wall Design

 

G. Per-cut for windows and doors.

H. Top steel plate structure.

I. Sandwich panels.

Standard exterior finish is cementitious stucco coating with options:

-Metal siding

-Wooden clap boards.

K. Bottom steel plate.

Floor design  

M. Reflective foil insulation.

N. Steel joists 24" on-center.

O. Main Girders.

 

 

 
  Powered by TOPws.com
Home | About us | Services | contact us
All rights reserved.copy rights Roudan and shuib.com